Mazda CX-9 Grand Touring 2009 Manual page 1553

1. Detach the T-stud which secure sections A of roof molding, using a flat head screwdriver or equivalent
tool.
2. While pulling the roof molding up, detach it from the clips at section B, C, and then remove the roof
molding.
Fig. 9: Identifying Roof Molding With T-Stud And Clips
Courtesy of MAZDA MOTORS CORP.
ROOF MOLDING INSTALLATION
1. Attach the roof molding to the T-stud at the front portion of section A.
2. Hook the roof molding to clips B, C and press it in to attach.
3. Attach the roof molding to the T-stud at the rear portion of section A.
2008 Mazda CX-9 Grand Touring
2008 ACCESSORIES & BODY, CAB Exterior Trim - Mazda CX-9