Fig. 71: Identifying Cylinder Head Cover Bolts Tightening Sequence (LH)
Courtesy of MAZDA MOTORS CORP.
FRONT OIL SEAL INSTALLATION NOTE
NOTE:
Apply clean engine oil to the front oil seal bore in the engine front cover.
1. Push the front oil seal slightly in by hand.
2. Tap the front oil seal in evenly using the SST and a hammer.
Substitution SST
49G028 203
Outer diameter: 58-70 mm {2.3-2.7 in}
Inner diameter: 56-58 mm {2.3-2.2 in}
Tube with board thickness 2 mm {0.079 in} or more
Fig. 72: Tapping Front Oil Seal With SST
Courtesy of MAZDA MOTORS CORP.
CRANKSHAFT PULLEY INSTALLATION NOTE
2008 Mazda CX-9 Grand Touring
2008 ENGINE Mechanical (MZI-3.7) - Mazda CX-9