Mazda CX-9 Grand Touring 2009 Manual page 1978

6. Install in the reverse order of removal.
Fig. 9: Identifying Inner Handle & Door Lock Knob
Courtesy of MAZDA MOTORS CORP.
REAR
1. Disconnect the negative battery cable.
2. Remove the inner sail garnish. (See INNER SAIL GARNISH REMOVAL/INSTALLATION .)
3. Remove the rear door trim. (See REAR DOOR TRIM REMOVAL/INSTALLATION .)
4. Detach the cables from the inner handle and door lock knob.
5. Install in the reverse order of removal.
Fig. 10: Identifying Inner Handle & Door Lock Knob
Courtesy of MAZDA MOTORS CORP.
HOOD LATCH & RELEASE LEVER REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the following parts:
1. Air cleaner (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZI-3.7] .)
2. Splash shield (LH) (See SPLASH SHIELD REMOVAL/INSTALLATION .)
3. Dashboard under cover (Driver side) (See DASHBOARD UNDER COVER
REMOVAL/INSTALLATION .)
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9