Mazda CX-9 Grand Touring 2009 Manual page 1838

2008 BODY & ACCESSORIES Instrumentation/Driver Info - Mazda CX-9
STEP CONDITION
Turn the ignition switch
1
to the ON position.
Turn the ignition switch
2
off.
Check code 07
CHECK CODE INSPECTION CHART (CHECK CODE 07)
Check code 07
2008 Mazda CX-9 Grand Touring
DISPLAY
Dimmer cancel switch ON/OFF signal
ACTION
Go to the next step.
Verify that the voltage of information
display terminal E is B+.
If the voltage is as specified, replace
the information display.
If the voltage is not as specified,
inspect the following parts:
Ignition switch
Wiring harness (Battery-
ignition switch-information
Verify that the voltage of the information
display terminal E is 1.0 V or less.
If the voltage is as specified, replace
the information display.
If the voltage is not as specified,
inspect the following parts:
Ignition switch
Wiring harness (Battery-
ignition switch-information
display)
Input signal to the information display is
normal.
display)