Fig. 35: Inspecting Rear Power Metal Oxide Semiconductor Field Effect Transistor (Power Mos
Fet)
Courtesy of MAZDA MOTORS CORP.
MAGNETIC CLUTCH DISASSEMBLY/ASSEMBLY
1. Install the SST (49 L061 001) or a commercially available filter wrench as shown in the figure and
remove the bolt.
When Using SST
Fig. 36: Removing Pressure Plate Bolt
Courtesy of MAZDA MOTORS CORP.
When Using Filter Wrench
2. Insert an appropriate bolt into the pressure plate thread hole and tighten it until the pressure plate is
removed.
2008 Mazda CX-9 Grand Touring
2008 HVAC Control System (HVAC) - Mazda CX-9