5. Pull in the direction of the arrows and detach the tabs.
6. Remove the interior light.
7. Install in the reverse order of removal.
NOTE:
INTERIOR LIGHT BULB
1. Disconnect the negative battery cable.
2. Insert a tape-wrapped flathead screwdriver into the service hole and pry with the screwdriver in the
direction shown by the arrow to remove the lens.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Lighting Systems - Mazda CX-9
Fig. 62: Identifying Interior Light & Bulb Housing
Courtesy of MAZDA MOTORS CORP.
After installing the wiring harness, reinforce the urethane that was
cut when removing the valve housing with vinyl tape.
Fig. 63: Identifying Interior Light With Tab
Courtesy of MAZDA MOTORS CORP.