Mazda CX-9 Grand Touring 2009 Manual page 1892

2. Pull the A-pillar trim shown in the figure in the direction of the arrow, raise clip B from its grommet
together with the A-pillar trim, and remove clips A at the same time.
Fig. 41: Identifying A-Pillar Trim & Clips
Courtesy of MAZDA MOTORS CORP.
3. Slide the A-pillar trim in the direction of the arrow shown in the figure and remove the A-pillar trim from
clip B.
Fig. 42: Sliding A-Pillar Trim
Courtesy of MAZDA MOTORS CORP.
4. Rotate and pull clip B in the direction of the arrow shown in the figure until it is no longer loose, and
feels tight.
5. Pull clip B and remove it from the grommet.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Interior Trim - Mazda CX-9