Mazda CX-9 Grand Touring 2009 Manual page 1694

8. Console cover (See CONSOLE COVER REMOVAL/INSTALLATION .)
9. Console (See CONSOLE REMOVAL/INSTALLATION .)
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
Fig. 23: Identifying Rear Airflow Mode Actuator Removal Order
Courtesy of MAZDA MOTORS CORP.
REAR AIRFLOW MODE ACTUATOR INSPECTION
1. Connect battery positive voltage to rear airflow mode actuator terminal F (or G), connect terminal G (or
F) to ground, and then verify that the rear airflow mode actuator operates as shown in the table.
If the operation condition is not normal, replace the rear airflow mode actuator.
REAR AIRFLOW MODE ACTUATOR OPERATION
Terminal
Rear airflow mode actuator operation
F G
B+ Ground
Ground B+
Fig. 24: Rear Airflow Mode Actuator Circuit Diagram
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
2008 HVAC Control System (HVAC) - Mazda CX-9
VENT --> HEAT
HEAT --> VENT