Mazda CX-9 Grand Touring 2009 Manual page 1695

Fig. 25: Rear Airflow Mode Actuator Inspection
Courtesy of MAZDA MOTORS CORP.
2. Verify that the resistance between terminals A and E, and E and C matches the rear airflow mode actuator
operation as shown in the graph.
If the operation condition and resistance are not normal, replace the rear airflow mode actuator.
Fig. 26: Rear Airflow Mode Actuator Operation Terminals A & E With E & C Resistance
Graph
Courtesy of MAZDA MOTORS CORP.
FRONT BLOWER MOTOR REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the dashboard under cover, (passenger side) (See DASHBOARD UNDER COVER
REMOVAL/INSTALLATION .)
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
2008 Mazda CX-9 Grand Touring
2008 HVAC Control System (HVAC) - Mazda CX-9