Mazda CX-9 Grand Touring 2009 Manual page 1977

Fig. 7: Identifying Shock-Absorbing Pad, Handle Base, Rod & Torque Specifications
Courtesy of MAZDA MOTORS CORP.
10. Secure the rear part of the rear outer handle and, with the rear outer handle lever pulled outward (1),
remove the rear part of the rear outer handle from the rear door.
11. Install in the reverse order of removal.
Fig. 8: Removing Rear Part Of Rear Outer Handle
Courtesy of MAZDA MOTORS CORP.
INNER HANDLE REMOVAL/INSTALLATION
FRONT
1. Disconnect the negative battery cable.
2. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION .)
3. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
4. Disconnect the door lock switch connector.
5. Detach the cables from the inner handle and door lock knob.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9