3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
5. Adjust the hood. (See HOOD ADJUSTMENT .)
Fig. 11: Identifying Hood Latch, Release Lever Components & Torque Specifications
Courtesy of MAZDA MOTORS CORP.
HOOD RELEASE LEVER REMOVAL NOTE
1. Pull the lever.
2. Insert a tape-wrapped flathead screwdriver into the position shown in the figure.
CAUTION:
3. Pull the hood release lever outward and remove it.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
Be careful not to damage the hood release cable when removing
the hood release lever with the flathead screwdriver.