Mazda CX-9 Grand Touring 2009 Manual page 1913

1. Disconnect the negative battery cable.
2. Remove the cover.
3. Remove the screw.
4. Rotate the sunvisor in the direction of the arrow.
5. Unhook and remove the sunvisor.
6. Disconnect the vanity mirror illumination connector.
Fig. 80: Identifying Sunvisor, Cover, Hook & Screw
Courtesy of MAZDA MOTORS CORP.
7. Press the center adaptor tabs as shown in the figure using two tape-wrapped flathead screwdrivers, and
remove the center adaptor.
8. Install in the reverse order of removal.
Fig. 81: Pressing Center Adaptor Tabs
Courtesy of MAZDA MOTORS CORP.
HEADLINER REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Partially peel back the seaming welt.
3. Remove the following parts:
1. A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION.)
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Interior Trim - Mazda CX-9