Mazda CX-9 Grand Touring 2009 Manual page 1419

pulley.
NOTE:
3. Turn the crankshaft clockwise to install the power steering oil pump drive belt.
Fig. 8: Positioning Power Steering Oil Pump Drive Belt
Courtesy of MAZDA MOTORS CORP.
NOTE:
4. Install the generator and A/C drive belt. (See GENERATOR AND A/C DRIVE BELT.)
5. Verify that the drive belt auto tensioner indicator mark does not exceeds the maximum belt length. (See
DRIVE BELT INSPECTION [MZI-3.7].)
If it exceeds the maximum belt length, replace the generator and A/C drive belt.
Fig. 9: Identifying Power Steering Oil Pump Drive Belt With Pulleys
Courtesy of MAZDA MOTORS CORP.
DRIVE BELT AUTO TENSIONER INSPECTION [MZI-3.7]
1. Remove the engine cover. (See ENGINE COVER REMOVAL/INSTALLATION [MZI-3.7].)
2008 Mazda CX-9 Grand Touring
2008 ENGINE Mechanical (MZI-3.7) - Mazda CX-9
Hold the SST and power steering oil pump drive belt by hand
until the power steering oil pump drive belt is properly seated.
Verify that the power steering oil pump drive belt is firmly attached to
the pulleys.