Mazda CX-9 Grand Touring 2009 Manual page 1897

Fig. 50: Identifying C-Pillar Trim & Cover
Courtesy of MAZDA MOTORS CORP.
5. Remove the bolt.
6. Detach clip A and tab B, and pin C by pulling them in the direction of the arrow.
7. Remove the C-pillar trim.
8. Install in the reverse order of removal.
Fig. 51: Identifying C-Pillar Trim With Bolt & Clips
Courtesy of MAZDA MOTORS CORP.
D-PILLAR TRIM REMOVAL/INSTALLATION
1. Remove the following parts:
1. Trunk box (See TRUNK BOX REMOVAL/INSTALLATION.)
2. Seat side box (See SEAT SIDE BOX REMOVAL/INSTALLATION.)
3. Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)
4. Third-row seat (See THIRD-ROW SEAT REMOVAL/INSTALLATION .)
5. Third-row seat belt lower anchor installation bolt (See REAR SCUFF PLATE
REMOVAL/INSTALLATION.)
6. Rear scuff plate inner (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)
7. Trunk side trim (See TRUNK SIDE TRIM REMOVAL/INSTALLATION.)
8. Roof side trim (See ROOF SIDE TRIM REMOVAL/INSTALLATION.)
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Interior Trim - Mazda CX-9