direction shown by the arrow to remove the lens.
Fig. 72: Inserting Screwdriver Into Service Hole
Courtesy of MAZDA MOTORS CORP.
IGNITION KEY ILLUMINATION BULB REMOVAL/INSTALLATION
VEHICLES WITHOUT ADVANCED KEYLESS SYSTEM
1. Disconnect the negative battery cable.
2. Pull the upper column cover upward and detach the upper column cover from the lower column cover.
(See COLUMN COVER REMOVAL/INSTALLATION .)
3. Put aside the upper columm cover.
4. Remove the ignition key illumination bulb.
5. Install in the reverse order of removal.
Fig. 73: Identifying Ignition Key Illumination Bulb
Courtesy of MAZDA MOTORS CORP.
VEHICLES WITH ADVANCED KEYLESS SYSTEM
1. Disconnect the negative battery cable.
2. Remove the lower column cover. (See COLUMN COVER REMOVAL/INSTALLATION .)
3. Remove the coil antenna. (See COIL ANTENNA REMOVAL/INSTALLATION [ADVANCED
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Lighting Systems - Mazda CX-9