4. Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION .)
5. Side wall (See SIDE WALL REMOVAL/INSTALLATION .)
6. Dashboard under cover (Passenger side) (See DASHBOARD UNDER COVER
REMOVAL/INSTALLATION .)
7. Console panel (See CONSOLE PANEL REMOVAL/INSTALLATION .)
8. Console cover (See CONSOLE COVER REMOVAL/INSTALLATION .)
9. Console (See CONSOLE REMOVAL/INSTALLATION .)
10. Selector lever component (See SELECTOR LEVER COMPONENT
REMOVAL/INSTALLATION .)
5. Remove the bolt.
6. Remove the rear cooler pipe No.1. Do not allow compressor oil to spill.
CAUTION:
7. Jack up the vehicle.
8. Remove the hose clip.
9. Remove the rear heater hose No.1 and No.2.
2008 Mazda CX-9 Grand Touring
2008 HVAC Basic System - Mazda CX-9
If moisture or foreign material enters the refrigeration cycle,
cooling ability will be lowered and abnormal noise will occur.
Always immediately plug open fittings after removing any
refrigeration cycle parts to keep moisture or foreign material out
of the cycle.
Fig. 20: Identifying Rear Cooler Pipe No.1 & Torque
Specifications