1. Verify that the drive belt auto tensioner indicator mark does not exceed the maximum belt length.
If it exceeds the maximum belt length, replace the generator and A/C drive belt. (See DRIVE
BELT REMOVAL/INSTALLATION [MZI-3.7].)
2. Visually inspect the generator and A/C drive belt for damage and cracks.
If there is generator and A/C drive belt damage and cracks, replace the generator and A/C drive
belt. (See DRIVE BELT REMOVAL/INSTALLATION [MZI-3.7].)
Fig. 3: Identifying Belt Length
Courtesy of MAZDA MOTORS CORP.
POWER STEERING OIL PUMP DRIVE BELT
1. Visually inspect the power steering oil pump drive belt for damage and cracks.
If there is power steering oil pump drive belt damage and cracks, replace the power steering oil
pump drive belt. (See DRIVE BELT REMOVAL/INSTALLATION [MZI-3.7].)
DRIVE BELT REMOVAL/INSTALLATION [MZI-3.7]
GENERATOR & A/C DRIVE BELT
NOTE:
When removing the generator and A/C drive belt, perform the procedure
with two people, one releasing the belt tension and the other removing the
belt.
1. Remove the engine cover. (See ENGINE COVER REMOVAL/INSTALLATION [MZI-3.7].)
2008 Mazda CX-9 Grand Touring
2008 ENGINE Mechanical (MZI-3.7) - Mazda CX-9