Mazda CX-9 Grand Touring 2009 Manual page 1684

3. Console panel (LH) (See CONSOLE PANEL REMOVAL/INSTALLATION .)
4. Hood release lever (See HOOD LATCH AND RELEASE LEVER
REMOVAL/INSTALLATION .)
5. Lower panel (See LOWER PANEL REMOVAL/INSTALLATION .)
3. Remove in the order indicated in the table.
Fig. 7: Identifying Front Air Mix Actuator Removal Order - Driver Side
Courtesy of MAZDA MOTORS CORP.
4. Install in the reverse order of removal.
PASSENGER SIDE
1. Disconnect the negative battery cable.
2. Remove the following parts:
1. Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION .)
2. Front console box mat (See FRONT CONSOLE BOX MAT REMOVAL/INSTALLATION .)
3. Indicator panel (See INDICATOR PANEL REMOVAL/INSTALLATION .)
4. Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION .)
5. Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION .)
6. Side wall (See SIDE WALL REMOVAL/INSTALLATION .)
7. Console panel (See CONSOLE PANEL REMOVAL/INSTALLATION .)
8. Console cover (See CONSOLE COVER REMOVAL/INSTALLATION .)
9. Console (See CONSOLE REMOVAL/INSTALLATION .)
10. Front scuff plate inner (See FRONT SCUFF PLATE REMOVAL/INSTALLATION .)
11. Front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
12. Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION .)
13. Hood release lever (See HOOD LATCH AND RELEASE LEVER
REMOVAL/INSTALLATION .)
14. Lower panel (See LOWER PANEL REMOVAL/INSTALLATION .)
15. Lower column cover (See COLUMN COVER REMOVAL/INSTALLATION .)
16. Driver-side air bag module (See DRIVER-SIDE AIR BAG MODULE
2008 Mazda CX-9 Grand Touring
2008 HVAC Control System (HVAC) - Mazda CX-9