Mazda CX-9 Grand Touring 2009 Manual page 1653

CAUTION:
8. When essentially no fuel is being discharged, stop the fuel pump.
9. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZI-3.7] .)
10. Remove the presilencer. (See EXHAUST SYSTEM REMOVAL/INSTALLATION [MZI-3.7] .)
11. To remove the fuel pump unit, remove the following parts:
1. Second-row seat (LH) (See SECOND-ROW SEAT REMOVAL/INSTALLATION .)
2. Edge cover (See LONG SLIDER REMOVAL/INSTALLATION .)
3. Long slider cover (See LONG SLIDER REMOVAL/INSTALLATION .)
4. Rear heat duct No.3 (See REAR HEAT DUCT COMPONENT
REMOVAL/INSTALLATION .)
5. Fuel pump unit (See FUEL PUMP UNIT REMOVAL/INSTALLATION [MZI-3.7].)
12. Siphon the fuel from the fuel tank.
13. Remove in the order indicated in the table.
14. Install in the reverse order of removal.
15. Complete the "AFTER SERVICE PRECAUTION". (See AFTER SERVICE PRECAUTION [MZI-
3.7].)
2008 Mazda CX-9 Grand Touring
2008 ENGINE Fuel System (MZI-3.7) - Mazda CX-9
The fuel pump could be damaged if it is operated (fuel
pump idling) while there is no fuel in the fuel tank. Verify
the amount of fuel being discharged from the hose and
stop operation of the fuel pump when essentially no fuel is
being discharged.
Fig. 14: Identifying Main Fuse Block (Fuel Pump Relay)
Courtesy of MAZDA MOTORS CORP.