Mazda CX-9 Grand Touring 2009 Manual page 1904

Fig. 62: Identifying Trunk Side Trim Components (Passenger Side)
Courtesy of MAZDA MOTORS CORP.
FRONT DOOR TRIM REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION.)
3. Open the cover using a small flathead screwdriver and remove the screw.
4. Remove the armrest garnish in the direction of the arrow.
5. Remove the bolt.
6. Detach clips A from the front door using a fastener remover.
7. Pull the front door trim upward and detach tabs B from the front door.
Fig. 63: Identifying Armrest Garnish, Clips & Bolts
Courtesy of MAZDA MOTORS CORP.
8. Remove tab A, and move the front door trim in the direction of the arrow.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Interior Trim - Mazda CX-9