Mazda CX-9 Grand Touring 2009 Manual page 1418

2. Turn the crankshaft clockwise to remove the power steering oil pump drive belt.
NOTE:
3. Install the power steering oil pump drive belt.
1. Install the SST according to the following steps.
1. Loosen the clamp adapter nut of the SST.
NOTE:
2. Position the SST on the power steering oil pump pulley with the clamp adapter in one of the
holes of the pulley.
3. Tighten the clamp adapter nut by hand.
NOTE:
2. Position the power steering oil pump drive belt around the SST and the power steering oil pump
2008 Mazda CX-9 Grand Touring
2008 ENGINE Mechanical (MZI-3.7) - Mazda CX-9
Courtesy of MAZDA MOTORS CORP.
If there is power steering oil pump drive belt damage and
cracks, replace the power steering oil pump drive belt.
There is no need to remove the clamp adapter nut
completely when positioning the SST on the power
steering oil pump pulley.
Hand tightening of the clamp adapter nut is sufficient.
Fig. 7: Positioning SST On Power Steering Oil Pump Pulley
Courtesy of MAZDA MOTORS CORP.