Mazda CX-9 Grand Touring 2009 Manual page 1846

2008 BODY & ACCESSORIES Instrumentation/Driver Info - Mazda CX-9
Fig. 22: Identifying Blind Spot Monitoring OFF Switch Terminals
Courtesy of MAZDA MOTORS CORP.
BLIND SPOT MONITORING (BSM) BRACKET REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the rear combination light. (See REAR COMBINATION LIGHT
REMOVAL/INSTALLATION .)
3. Remove the rear bumper. (See REAR BUMPER REMOVAL/INSTALLATION .)
4. Remove the BSM control module. (See BLIND SPOT MONITORING (BSM) CONTROL MODULE
REMOVAL/INSTALLATION.)
5. Remove the nuts.
6. Remove the BSM bracket.
7. Install in the reverse order of removal.
Fig. 23: Identifying Blind Spot Monitoring Bracket & Torque Specifications
Courtesy of MAZDA MOTORS CORP.
CUSTOMIZED FUNCTION SETTING PROCEDURE
1. Connect the M-MDS to the DLC-2.
NOTE:
2008 Mazda CX-9 Grand Touring
The BSM can be customized using the IDS only.