Mazda CX-9 Grand Touring 2009 Manual page 1150

2008 ENGINE PERFORMANCE On-Board Diagnostic (MZI-3.7) - Mazda CX-9
recorded?
VERIFY RELATED REPAIR
INFORMATION AVAILABILITY
Verify related Service Bulletins and/or
2
on-line repair information availability.
Is any related Service Bulletins
available?
INSPECT DRIVE BELT DAMAGED
Verify inspect the drive belt for
3
damage.
Is the drive belt normal?
INSPECT GENERATOR TERMINAL
FOR POOR INSTALLATION
Turn the engine switch off.
4
Inspect generator terminal B for
looseness.
Are there any malfunction?
INSPECT GENERATOR CIRCUIT FOR
SHORT TO GROUND
Inspect for continuity between the
following terminal:
5
Generator terminal RC (wiring
harness-side) and body ground.
Generator terminal LI (wiring
harness-side) and body ground.
Are there continuity?
INSPECT BATTERY POSITIVE
TERMINAL FOR POOR
INSTALLATION
6
Turn the engine switch off.
Inspect the battery positive terminal for
looseness.
Is there any malfunction?
INSPECT GENERATOR CIRCUIT FOR
OPEN CIRCUIT
7
Inspect the continuity between
generator terminal B (wiring harness-
side) and battery positive terminal
2008 Mazda CX-9 Grand Touring
Perform repair or diagnosis according to the
available Service Bulletins.
Yes
No
Yes Go to the next step.
Replace the drive belt, then go to Step 10. (See
No
DRIVE BELT INSPECTION [MZI-3.7] .)
Connect generator terminal B correctly, then go
Yes
to Step 10.
No
Repair or replace suspected part, then go to
Yes
Step 10.
No
Connect the battery positive terminal correctly,
Yes
then go to Step 10.
No
Yes Go to the next step.
Repair or replace suspected part, then go to
order, then go to the next step.
If the vehicle is not repaired, go to the
next step.
Go to the next step.
Go to the next step.
Go to the next step.
Go to the next step.