Mazda CX-9 Grand Touring 2009 Manual page 1995

Lock B+ GND
Unlock GND B+
Fig. 46: Identifying Liftgate Lock Actuator Terminals
Courtesy of MAZDA MOTORS CORP.
LIFTGATE OUTER HANDLE REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the liftgate upper trim. (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION .)
3. Remove the liftgate side trim. (See LIFTGATE SIDE TRIM REMOVAL/INSTALLATION .)
4. Remove the liftgate lower trim. (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION .)
5. Remove the rear finisher. (See REAR FINISHER REMOVAL/INSTALLATION .)
6. Disconnect the liftgate outer handle switch connector. (Vehicles with power liftgate system)
7. Disconnect the cable. (Vehicles without power liftgate system)
8. Remove in the order indicated in the table.
Fig. 47: Identifying Liftgate Outer Handle With Nut & Torque Specifications
Courtesy of MAZDA MOTORS CORP.
9. Install in the reverse order of removal.
LIFTGATE OUTER HANDLE SWITCH INSPECTION
1. Verify that the continuity between the liftgate outer handle switch terminals is as indicated in the table.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9