Mazda CX-9 Grand Touring 2009 Manual page 1134

2008 ENGINE PERFORMANCE On-Board Diagnostic (MZI-3.7) - Mazda CX-9
DTC P060A, P060C, P060F, P061D [MZI-3.7]
DTC P060A, P060C, P060F, P061D (MZI-3.7) DETECTION CONDITIONS AND POSSIBLE CAUSES
DTC P060A
DTC P060C
DTC P061D
DETECTION CONDITION
POSSIBLE CAUSE
DIAGNOSTIC PROCEDURE
DTC P060A, P060C, P060F, P061D (MZI-3.7) DIAGNOSTIC PROCEDURE
STEP
VERIFY FREEZE FRAME DATA HAS
BEEN RECORDED
1
Has FREEZE FRAME DATA been
recorded?
VERIFY RELATED REPAIR
INFORMATION AVAILABILITY
Verify related Service Bulletins and/or
2
on-line repair information availability.
Is any related Service Bulletins
available?
INSPECT PCM FOR LATEST
CALIBRATION
Program the PCM to the latest
calibration.
Turn the ignition switch off.
Perform the KOEO self-test.
3
Turn the ignition switch off.
Perform the KOER self-test.
Use the customer information to
recreate the concern.
Perform the self-test.
Are DTCs P060A, P060C or P060D
present?
INSPECT FOR CORRECT PCM
OPERATION
2008 Mazda CX-9 Grand Touring
P060A: Internal control module monitoring processor performance
P060C: Internal control module main processor performance
P061D: Internal control module engine air mass performance
Indicates an error occurred in the PCM.
Software incompatibility issue
PCM malfunction
INSPECTION ACTION
Yes Go to the next step.
Record FREEZE FRAME DATA on the repair
No
order, then go to the next step.
Perform repair or diagnosis according to the
available Service Bulletins.
Yes
If the vehicle is not repaired, go to the
next step.
No Go to the next step.
Yes Go to the next step.
No Go to Step 5.