Fig. 32: Identifying Presilencer, Middle Pipe & Torque Specifications
20. Remove the bolt.
21. Remove the clip.
22. Disconnect rear cooler pipe No.1 and remove rear cooler pipes No.2 and No.1.
23. Install in the reverse order of removal.
24. Inspect for engine coolant leakage. (See ENGINE COOLANT LEAKAGE INSPECTION [MZI-
3.7] .)
25. Inspect the ATF level. (See AUTOMATIC TRANSAXLE FLUID (ATF) INSPECTION [AW6A-EL,
AW6AX-EL] .)
26. Perform the refrigerant system performance test. (See REFRIGERANT SYSTEM PERFORMANCE
TEST .)
Fig. 33: Identifying Rear Cooler Pipes No.2, No.1 & Torque Specifications
REFRIGERANT LINE REMOVAL NOTE
2008 Mazda CX-9 Grand Touring
2008 HVAC Basic System - Mazda CX-9