Mazda CX-9 Grand Touring 2009 Manual page 1976

Fig. 6: Pulling Out Front Side Of Front Outer Handle
Courtesy of MAZDA MOTORS CORP.
REAR OUTER HANDLE REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the following parts:
1. Inner sail garnish (See INNER SAIL GARNISH REMOVAL/INSTALLATION .)
2. Rear door trim (See REAR DOOR TRIM REMOVAL/INSTALLATION .)
3. Rear door speaker (See REAR DOOR SPEAKER REMOVAL/INSTALLATION .)
4. Rear door glass (See REAR DOOR GLASS REMOVAL/INSTALLATION .)
5. Rear door module (See REAR DOOR MODULE REMOVAL/INSTALLATION .)
3. Remove the service hole cover.
4. Remove the fastener.
5. Remove the shock-absorbing pad.
6. Disconnect the rod.
7. Remove the nuts.
8. Remove the handle base.
9. Remove the bolts.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9