Fig. 15: Checking Continuity Between Hood Latch Switch Terminals
Courtesy of MAZDA MOTORS CORP.
FRONT DOOR KEY CYLINDER REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the following parts:
1. Inner garnish (See INNER GARNISH REMOVAL/INSTALLATION .)
2. Front door trim (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
3. Front door speaker (See FRONT DOOR SPEAKER REMOVAL/INSTALLATION .)
4. Front door glass (See FRONT DOOR GLASS REMOVAL/INSTALLATION .)
5. Front door module (See FRONT DOOR MODULE REMOVAL/INSTALLATION .)
3. Remove in the order indicated in the table.
Fig. 16: Identifying Front Door Key Cylinder Bolt, Rod & Torque Specifications
Courtesy of MAZDA MOTORS CORP.
4. Install in the reverse order of removal.
FRONT DOOR KEY CYLINDER REMOVAL NOTE
1. Remove the front door key cylinder by turning it in the direction shown by the arrow.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9