Fig. 78: Inserting Screwdriver Into Service Hole
Courtesy of MAZDA MOTORS CORP.
VANITY MIRROR ILLUMINATION INSPECTION
1. Remove the sunvisor. (See SUNVISOR REMOVAL/INSTALLATION .)
2. Verify that the continuity between the vanity mirror illumination terminals is as indicated in the table.
If not as indicated in the table, inspect the bulb. If there is no malfunction, replace the sunvisor.
Fig. 79: Terminals Continuity Chart
Courtesy of MAZDA MOTORS CORP.
Fig. 80: Checking Continuity Between Vanity Mirror Illumination Terminals
Courtesy of MAZDA MOTORS CORP.
INDIRECT ILLUMINATION REMOVAL/INSTALLATION
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Lighting Systems - Mazda CX-9