Mazda CX-9 Grand Touring 2009 Manual page 1916

10. Front scuff plate inner (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)
11. Front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)
12. Dust cover (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION .)
13. Side wall (See SIDE WALL REMOVAL/INSTALLATION.)
14. Console panel (See CONSOLE PANEL REMOVAL/INSTALLATION.)
15. Console cover (See CONSOLE COVER REMOVAL/INSTALLATION.)
16. Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION.)
17. Front console box mat (See FRONT CONSOLE BOX MAT REMOVAL/INSTALLATION.)
18. Indicator panel (See INDICATOR PANEL REMOVAL/INSTALLATION.)
19. Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION.)
20. Console (See CONSOLE REMOVAL/INSTALLATION.)
21. Rear scuff plate inner (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)
22. Front seat belt lower anchor installation bolt (Driver side) (See FRONT SEAT BELT
REMOVAL/INSTALLATION .)
23. B-pillar lower trim (See B-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)
24. Third-row seat belt lower anchor installation bolt (See THIRD-ROW SEAT BELT
REMOVAL/INSTALLATION .)
25. Trunk side trim (See TRUNK SIDE TRIM REMOVAL/INSTALLATION.)
26. Fuel-filler lid release cover (See FUEL-FILLER LID OPENER
REMOVAL/INSTALLATION .)
3. Remove the fasteners A and B.
4. Remove the nut.
5. Take the floor covering out from the opened liftgate.
6. Install in the reverse order of removal.
Fig. 84: Identifying Floor Covering With Fasteners
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Interior Trim - Mazda CX-9