Mazda CX-9 Grand Touring 2009 Manual page 1097

2008 ENGINE PERFORMANCE On-Board Diagnostic (MZI-3.7) - Mazda CX-9
VERIFY FREEZE FRAME DATA
HAS BEEN RECORDED
1
Has FREEZE FRAME DATA been
recorded?
VERIFY REPAIR INFORMATION
AVAILABILITY
Verify related Service Bulletins
2
availability.
Is any related Service Bulletins
available?
VERIFY RELATED PENDING CODE
OR STORED DTCs
Turn the ignition switch off then to
3
the ON position (Engine off).
Verify related pending code or
stored DTCs.
Is other DTCs present?
VERIFY STORED DTC IN
INSTRUMENT CLUSTER
Turn the ignition switch off then to
4
the ON position (Engine off).
Verify stored DTCs in instrument
cluster.
Is other DTCs present?
VERIFY TROUBLESHOOTING OF
DTC P0463 HAS BEEN COMPLETED
Verify that all disconnected
connectors reconnected.
Clear the DTC from the PCM
5
memory using the M-MDS.
Perform the "KOEO/KOER self-
test". (See KOEO/KOER SELF
TEST [MZI-3.7].)
Is the PENDING CODE for the
DTC present?
VERIFY AFTER REPAIR
PROCEDURE
Perform the "AFTER REPAIR
2008 Mazda CX-9 Grand Touring
Yes Go to the next step.
Record the FREEZE FRAME DATA on the repair
No
Perform repair or diagnosis according to the
Yes available Service Bulletins. If the vehicle is not
repaired, go to the next step.
No
Go to the appropriate DTC troubleshooting. (See
Yes
DTC TABLE [MZI-3.7].)
No
Go to the appropriate DTC inspection. (See DTC
Yes
TABLE [INSTRUMENT CLUSTER] .)
No
Replace the PCM, then go to the next step. (See
Yes PCM REMOVAL/INSTALLATION [MZI-
3.7] .)
No
Go to the applicable DTC inspection. (See DTC
Yes
TABLE [MZI-3.7].)
order, then go to the next step.
Go to the next step.
Go to the next step.
Go to the next step.
Go to the next step.