Mazda CX-9 Grand Touring 2009 Manual page 1996

If not as indicated in the table, replace the liftgate outer handle. (See LIFTGATE OUTER
HANDLE REMOVAL/INSTALLATION.)
Fig. 48: Terminals Continuity Chart
Courtesy of MAZDA MOTORS CORP.
Fig. 49: Checking Continuity Between Liftgate Outer Handle Switch Terminals
Courtesy of MAZDA MOTORS CORP.
FUEL-FILLER LID OPENER REMOVAL/INSTALLATION
1. When removing the fuel-filler lid opener, perform the following procedure:
1. Trunk box. (See TRUNK BOX REMOVAL/INSTALLATION .)
2. Seat side box. (See SEAT SIDE BOX REMOVAL/INSTALLATION .)
3. Trunk end trim. (See TRUNK END TRIM REMOVAL/INSTALLATION .)
4. Third-row seat. (See THIRD-ROW SEAT REMOVAL/INSTALLATION .)
5. Rear scuff plate inner. (LH) (See REAR SCUFF PLATE REMOVAL/INSTALLATION .)
6. Third-row seat belt lower anchor installation bolt. (Driver side) (See THIRD-ROW SEAT BELT
REMOVAL/INSTALLATION .)
7. Trunk side trim. (Driver side) (See TRUNK SIDE TRIM REMOVAL/INSTALLATION .)
2. When removing the fuel-filler lid opener cable, perform the following procedure:
1. Front scuff plate inner (LH) (See FRONT SCUFF PLATE REMOVAL/INSTALLATION .)
2. Rear scuff plate inner (LH) (See REAR SCUFF PLATE REMOVAL/INSTALLATION .)
3. Front seat belt lower anchor installation bolt (Driver side) (See FRONT SEAT BELT
REMOVAL/INSTALLATION .)
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9