14. Remove the power steering oil pump drive belt. (See DRIVE BELT REMOVAL/INSTALLATION
[MZI-3.7].)
15. Remove in the order indicated in the table.
16. Install in the reverse order of removal.
Fig. 103: Identifying Crankshaft Pulley Lock Bolt, Crankshaft Pulley, Oil Seal & Torque
Specifications
Courtesy of MAZDA MOTORS CORP.
CRANKSHAFT PULLEY LOCK BOLT REMOVAL NOTE
1. Remove the cover as shown in the figure.
2008 Mazda CX-9 Grand Touring
2008 ENGINE Mechanical (MZI-3.7) - Mazda CX-9