Mazda CX-9 Grand Touring 2009 Manual page 1142

2008 ENGINE PERFORMANCE On-Board Diagnostic (MZI-3.7) - Mazda CX-9
DETECTION CONDITION
POSSIBLE CAUSE
DIAGNOSTIC PROCEDURE
DTC P061C (MZI-3.7) DIAGNOSTIC PROCEDURE
STEP
VERIFY FREEZE FRAME DATA HAS
BEEN RECORDED
1
Has FREEZE FRAME DATA been
recorded?
VERIFY RELATED REPAIR
INFORMATION AVAILABILITY
Verify related Service Bulletins and/or
2
on-line repair information availability.
Is any related Service Bulletins
available?
VERIFY RELATED PENDING CODE
OR STORED DTCs
Turn the ignition switch off then to the
3
ON position (Engine off).
Verify related pending code or stored
DTCs.
Are other DTCs present?
INSPECT CKP SENSOR SIGNAL SENT
TO PCM
NOTE:
4
The battery should be fully charged
and the starting system should be
functioning properly.
2008 Mazda CX-9 Grand Touring
Indicates that a calculation error occurred in the PCM.
CKP sensor circuit is open or short.
CKP sensor circuit intermittent
CKP sensor malfunction
CMP sensor circuit is open or short.
CMP sensor circuit intermittent
CMP sensor malfunction
PCM malfunction
INSPECTION ACTION
Yes Go to the next step.
Record FREEZE FRAME DATA on the repair
No
order, then go to the next step.
Perform repair or diagnosis according to the
available Service Bulletins.
Yes
If the vehicle is not repaired, go to the
next step.
No Go to the next step.
Go to the appropriate DTC troubleshooting. (See
Yes
DTC TABLE [MZI-3.7].)
No Go to the next step.
Yes Go to the next step.