Mazda CX-9 Grand Touring 2009 Manual page 1195

2008 ENGINE PERFORMANCE On-Board Diagnostic (MZI-3.7) - Mazda CX-9
Are any DTCs present?
DTC P1336 [MZI-3.7]
DTC P1336 (MZI-3.7) DETECTION CONDITIONS AND POSSIBLE CAUSES
DTC P1336
DETECTION
CONDITION
POSSIBLE CAUSE
DIAGNOSTIC PROCEDURE
DTC P1336 (MZI-3.7) DIAGNOSTIC PROCEDURE
STEP INSPECTION
VERIFY FREEZE FRAME DATA HAS
BEEN RECORDED
1
Has FREEZE FRAME DATA been
recorded?
VERIFY RELATED REPAIR
INFORMATION AVAILABILITY
Verify related Service Bulletins
2
and/or on-line repair information
availability.
Is any related Service Bulletins
available?
VERIFY RELATED PENDING CODE
OR STORED DTC
3
Verify the related PENDING CODE
or stored DTCs.
Are other DTCs present?
INSPECT THE CKP SENSOR SIGNAL
SENT TO THE PCM
4
NOTE:
The battery should be fully
charged and the starting system
2008 Mazda CX-9 Grand Touring
CKP/CMP sensor range/performance
The input signal to the PCM from the CKP sensor or the CMP sensor
is erratic.
CKP sensor malfunction
CMP sensor malfunction
Base engine malfunction
Connector or terminal malfunction
Yes Go to the next step.
No
Yes
No
Yes
No
Yes Go to Step 8.
No Troubleshooting completed.
ACTION
Record FREEZE FRAME DATA on the repair
order, then go to the next step.
Perform repair or diagnosis according to the
available Service Bulletins.
If the vehicle is not repaired, go to the next
step.
Go to the next step.
Go to appropriate DTC inspection. (See DTC
TABLE [MZI-3.7].)
Go to the next step.