Fig. 18: Identifying Rear Heat Duct No.4
REAR COOLER DUCT REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the console cover. (See CONSOLE COVER REMOVAL/INSTALLATION .)
3. Remove the screws.
4. Remove the rear cooler duct.
5. Install in the reverse order of removal.
Fig. 19: Identifying Rear Cooler Duct
REAR A/C UNIT REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Evacuate the refrigerant from the system. (See REFRIGERANT RECOVERY .) (See
REFRIGERANT CHARGING .)
3. Drain the engine coolant. (See ENGINE COOLANT REPLACEMENT [MZI-3.7] .)
4. Remove the following parts:
1. Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION .)
2. Front console box mat (See FRONT CONSOLE BOX MAT REMOVAL/INSTALLATION .)
3. Indicator panel (See INDICATOR PANEL REMOVAL/INSTALLATION .)
2008 Mazda CX-9 Grand Touring
2008 HVAC Basic System - Mazda CX-9