Mazda CX-9 Grand Touring 2009 Manual page 1948

METER 10 A
2C IG 1
fuse
Power
2D
supply
TNS relay
2G TNS relay
operation
H/L LOW
H/L LOW
2K relay
relay
operation
TNS switch
2M Light switch
on/off
Light
2N switch Light switch
on/off
2O GND GND
AUTO LIGHT/WIPER CONTROL MODULE REMOVAL/INSTALLATION
NOTE:
Auto light-off system are integrated with the auto light/wiper control
module.
1. Disconnect the negative battery cable.
2. Remove the dashboard under cover (Driver side). (See DASHBOARD UNDER COVER
REMOVAL/INSTALLATION .)
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Lighting Systems - Mazda CX-9
Ignition switch at ON
Ignition switch at LOCK
or ACC
BCM
ROOM
Constant
15 A
fuse
Light switch at low-
beam or high-beam
position
Light switch at OFF
Light switch at high-
beam position
Light switch at OFF or
low-beam position
Light switch
at low-beam
or high-beam
Ignition
position
switch at
ON
Light switch
at OFF
position
Light switch
at low-beam
or high-beam
Ignition
position
switch at
ON
Light switch
at OFF
position
Under any condition
(V)
B+
METER 10 A fuse
1.0 or
Related wiring harnesses
less
BCM (See BODY
CONTROL MODULE
(BCM) INSPECTION .)
B+
Inspect ROOM 15 A fuse
Related wiring harnesses
TAIL 10 A fuse
Below
TNS relay (See RELAY
1.5
INSPECTION .)
B+
Related wiring harnesses
Below
H/L LOW relay (See
1.5
RELAY
INSPECTION .)
B+
Related wiring harnesses
1.0 or
Light switch (See
less
LIGHT SWITCH
INSPECTION.)
Related wiring harnesses
B+
1.0 or
Light switch (See
less
LIGHT SWITCH
INSPECTION.)
Related wiring harnesses
B+
1.0 or
Related wiring harnesses
less