Mazda CX-9 Grand Touring 2009 Manual page 1953

operation
Light switch
2L
signal
TNS switch
2M
on/off
Light switch
2N
on/off
2O GND
Parking
(1)
brake switch
2P
on/off
(1) For vehicles with DRL only.
AUTO LIGHT/WIPER CONTROL MODULE CONFIGURATION
NOTE:
Use the IDS (laptop PC) because the PDS (Pocket PC) does not support
the AUTO LIGHT/WIPER CONTROL MODULE CONFIGURATION.
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
When using the IDS (laptop PC)
1. Select "Module Programming".
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Lighting Systems - Mazda CX-9
relay
Light switch at OFF or
low-beam position
Ignition
Light switch switch at
ON
Ignition
Light switch switch at
ON
Ignition
Light switch switch at
ON
GND Under any condition
BCM
Ignition
Parking
switch at
brake
ON
switch
B+
Light switch
1.0 or
at AUTO
less
position
Other B+
Light switch
at low-beam 1.0 or
or high-beam less
position
Light switch
at OFF B+
position
Light switch
at low-beam 1.0 or
or high-beam less
position
Light switch
at OFF B+
position
1.0 or
less
Parking brake 1.0 or
switch on less
Parking brake
B+
switch OFF
Related wiring
harnesses
Light switch (See
LIGHT SWITCH
INSPECTION.)
Related wiring
harnesses
Light switch (See
LIGHT SWITCH
INSPECTION.)
Related wiring
harnesses
Light switch (See
LIGHT SWITCH
INSPECTION.)
Related wiring
harnesses
Related wiring
harnesses
BCM (See BODY
CONTROL
MODULE (BCM)
INSPECTION .)
Parking brake switch
Related wiring
harnesses