Mazda CX-9 Grand Touring 2009 Manual page 1627

8. When essentially no fuel is being discharged, stop operation of the fuel pump.
9. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZI-3.7] .)
10. To remove the rear heat duct No.3, remove the following parts:
1. Second-row seat (LH) (See SECOND-ROW SEAT REMOVAL/INSTALLATION .)
2. Edge cover (See LONG SLIDER REMOVAL/INSTALLATION .)
3. Long slider cover (See LONG SLIDER REMOVAL/INSTALLATION .)
4. Remove the rear heat duct No.3. (See REAR HEAT DUCT COMPONENT
REMOVAL/INSTALLATION .)
11. Remove in the order indicated in the table.
12. Install in the reverse order of removal.
13. Complete the "AFTER SERVICE PRECAUTION". (See AFTER SERVICE PRECAUTION [MZI-
3.7].)
2WD
Fig. 29: Identifying Fuel Pump Unit, Quick Release Connector, Service Hole Cover & Torque
Specifications (2WD)
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
2008 ENGINE Fuel System (MZI-3.7) - Mazda CX-9
Fig. 28: Identifying Main Fuse Block (Fuel Pump Relay)
Courtesy of MAZDA MOTORS CORP.