Mazda CX-9 Grand Touring 2009 Manual page 1657

8. When essentially no fuel is being discharged, stop the fuel pump.
9. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZI-3.7] .)
10. To remove the propeller shaft, remove the following parts:
1. Presilencer (See EXHAUST SYSTEM REMOVAL/INSTALLATION [MZI-3.7] .)
2. Presilencer insulator
3. Propeller shaft (See PROPELLER SHAFT REMOVAL/INSTALLATION .)
11. To remove the fuel pump unit, remove the following parts:
1. Second-row seat (LH) (See SECOND-ROW SEAT REMOVAL/INSTALLATION .)
2. Edge cover (See LONG SLIDER REMOVAL/INSTALLATION .)
3. Long slider cover (See LONG SLIDER REMOVAL/INSTALLATION .)
Fig. 19: Identifying Presilencer Insulator & Torque Specifications
Courtesy of MAZDA MOTORS CORP.
4. Rear heat duct No.3 (See REAR HEAT DUCT COMPONENT
REMOVAL/INSTALLATION .)
5. Fuel pump unit (See FUEL PUMP UNIT REMOVAL/INSTALLATION [MZI-3.7].)
12. Siphon the fuel from the fuel tank.
13. Remove in the order indicated in the table.
14. Install in the reverse order of removal.
15. Complete the "AFTER SERVICE PRECAUTION". (See AFTER SERVICE PRECAUTION [MZI-
3.7].)
2008 Mazda CX-9 Grand Touring
2008 ENGINE Fuel System (MZI-3.7) - Mazda CX-9
Courtesy of MAZDA MOTORS CORP.