Mazda CX-9 Grand Touring 2009 Manual page 1536

Fig. 62: Identifying Inverter Unit Connector Terminals
Courtesy of MAZDA MOTORS CORP.
TERMINAL VOLTAGE TABLE
VOLTAGE SPECIFICATION
Signal
Terminal
name
AC power
A, B supply
output
E ACC
Power
M
supply
N GND
REAR MOUNT CAMERA REMOVAL/INSTALLATION
1. Remove the liftgate upper trim. (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION .)
2. Remove the liftgate side trim. (See LIFTGATE SIDE TRIM REMOVAL/INSTALLATION .)
3. Remove the liftgate lower trim. (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION .)
4. Remove the rear finisher. (See REAR FINISHER REMOVAL/INSTALLATION .)
5. Remove in the order indicated in the table.
Fig. 63: Identifying Rear Mount Camera Screws
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Entertainment - Mazda CX-9
Connected to Measured condition
Ignition switch is at
ACC or ON position
Power supply
socket (AC 115 V)
Ignition switch is at
LOCK position
Ignition switch is at
ACC or ON position
MIRROR 7.5 A
fuse
Ignition switch is at
LOCK position
AC PWR 15 A
Under any condition
fuse
Body ground Under any condition
Voltage (V)/
Inspection item (s)
Continuity
Power supply
AC 103-5-
socket (AC
126.5
115V)
Related wiring
1.0 or less
harnesses
MIRROR 7.5 A
B+
fuse
Related wiring
1.0 or less
harnesses
AC PWR 15 A
fuse
B+
Related wiring
harnesses
Related wiring
1.0 or less
harnesses