Mazda CX-9 Grand Touring 2009 Manual page 1928

(previously verified as illuminating
normally). (See HEADLIGHT BULB
REMOVAL/INSTALLATION.)
Connect the discharge headlight control
7
module connector.
Turn the headlight switch to the
HEADLIGHT (LO) position.
Does the headlight (low-beam) illuminate?
PARKING/FRONT SIDE MARKER LIGHT BULB REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the coolant reserve tank. (RH only) (See COOLANT RESERVE TANK
REMOVAL/INSTALLATION [MZI-3.7] .)
3. Remove in the order indicated in the table.
Fig. 13: Identifying Parking/Front Side Marker Light Bulb, Connector & Socket
Courtesy of MAZDA MOTORS CORP.
4. Install in the reverse order of removal.
FRONT TURN LIGHT BULB REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the coolant reserve tank. (RH only) (See COOLANT RESERVE TANK
REMOVAL/INSTALLATION [MZI-3.7] .)
3. Remove in the order indicated in the table.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Lighting Systems - Mazda CX-9
Replace the discharge headlight control
module. (See DISCHARGE
No
HEADLIGHT CONTROL MODULE
REMOVAL/INSTALLATION.)