Fig. 19: Identifying Front Airflow Mode Actuator Removal Order
Courtesy of MAZDA MOTORS CORP.
FRONT AIRFLOW MODE ACTUATOR INSPECTION
1. Connect battery positive voltage to front airflow mode actuator terminal F (or G), connect terminal G (or
F) to ground, and then verify that the front airflow mode actuator operates as shown in the table.
If the operation condition is not normal, replace the front airflow mode actuator.
FRONT AIRFLOW MODE ACTUATOR OPERATION
Terminal
Front airflow mode actuator operation
F
G
B+
Ground
Ground
B+
Fig. 20: Front Airflow Mode Actuator Circuit Diagram
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
2008 HVAC Control System (HVAC) - Mazda CX-9
VENT --> DEFROSTER
DEFROSTER --> VENT