Table of Contents
Advertisement
2. Remove the roof side trim.
3. Install in the reverse order of removal.
Fig. 49: Identifying Roof Side Trim & Clips
Courtesy of MAZDA MOTORS CORP.
C-PILLAR TRIM REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the following parts:
1. Trunk box (See TRUNK BOX REMOVAL/INSTALLATION.)
2. Seat side box (See SEAT SIDE BOX REMOVAL/INSTALLATION.)
3. Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)
4. Third-row seat (See THIRD-ROW SEAT REMOVAL/INSTALLATION .)
5. Third-row seat belt lower anchor installation bolt (See THIRD-ROW SEAT BELT
REMOVAL/INSTALLATION .)
6. Rear scuff plate inner (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)
7. Trunk side trim (See TRUNK SIDE TRIM REMOVAL/INSTALLATION.)
8. Second-row seat belt upper anchor installation bolt (See SECOND-ROW SEAT BELT
REMOVAL/INSTALLATION .)
9. Roof side trim (See ROOF SIDE TRIM REMOVAL/INSTALLATION.)
3. Partially peel back the seaming welt.
4. Remove the cover in the direction of the arrow.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Interior Trim - Mazda CX-9
Hide quick links:
Advertisement
Table of Contents
