1. Remove the following parts:
1. Dashboard under cover (Passenger side) (See DASHBOARD UNDER COVER
REMOVAL/INSTALLATION.)
2. Glove compartment service hole cover (See AIR FILTER REMOVAL/INSTALLATION .)
2. Pull the stay damper in the direction shown in the figure, and detach the connecting part between the
glove compartment and the stay damper.
Fig. 18: Identifying Glove Compartment & Stay Damper
Courtesy of MAZDA MOTORS CORP.
3. Insert fingers into the glove compartment service hole and detach the stoppers while holding the
instrument panel.
Fig. 19: Identifying Glove Compartment Service Hole
Courtesy of MAZDA MOTORS CORP.
4. Lower the glove compartment.
5. Detach the hook from the dashboard and remove the glove compartment.
6. Install in the reverse order of removal.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Interior Trim - Mazda CX-9
damper, the stay damper may be damaged. Verify that the stay
damper is joined to the glove compartment before closing the glove
compartment.