1. Slide the decoration plate towards the vehicle front as shown in the figure, then pull out the pin and hooks
and remove the decoration plate.
Fig. 37: Sliding Decoration Plate
Courtesy of MAZDA MOTORS CORP.
DECORATION PANEL REMOVAL/INSTALLATION
1. Detach clips A and pin B by pulling them in the direction of the arrow.
2. Remove the decoration panel.
3. Install in the reverse order of removal.
Fig. 38: Identifying Decoration Panel With Pin & Clips
Courtesy of MAZDA MOTORS CORP.
CONSOLE PANEL REMOVAL/INSTALLATION
RH
1. Remove the decoration panel (RH). (See DECORATION PANEL REMOVAL/INSTALLATION.)
2. Remove the dashboard under cover (Passenger side). (See DASHBOARD UNDER COVER
REMOVAL/INSTALLATION.)
3. Detach clips A and B, and hooks by pulling them in the direction of the arrow.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Interior Trim - Mazda CX-9