Mazda CX-9 Grand Touring 2009 Manual page 2028

Changing the additional key
programming procedure. (Method for
programming other keys using two keys
5 that can start the engine is disabled.)
(See NO. 5 KEY ADDITIONAL
PROGRAMMING PROCEDURE
CHANGING.)
Changing the additional key
programming procedure. Allows
programming using two keys that can
5
start the engine. (See NO. 5 KEY
ADDITIONAL PROGRAMMING
PROCEDURE CHANGING.)
Replacing the steering lock unit. (See
6 NO.6 STEERING LOCK UNIT
REPLACEMENT PROCEDURE.)
Replacing the keyless control module.
(See NO.7 KEYLESS CONTROL
7
MODULE REPLACEMENT
PROCEDURE.)
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
M-MDS
M-MDS
M-MDS
New steering
lock unit
Programmed
card key
New keys (Two
or more)
M-MDS
New keyless
control module
Programming
card key
Programming
keys (Two or
more)
M-MDS
The additional key
programming using No. 1
cannot be performed after
the procedure. It is possible
to restore the setting. For
restoring the setting, the M-
MDS is necessary.
New vehicles have this
setting.
Have two or more keys
ready for programming
before beginning the
procedure, since the
previous keys will be
invalid.
The steering lock unit
programming is necessary
for the keyless control
module before the key
programming.
Two or more keys need to be
programmed after the
procedure to start the engine.
Unless keys are
reprogrammed after the
procedure, the engine cannot
be started. Before beginning
the procedure, verify that the
customer has turned in all of
the card keys and keys for
the vehicle.
Programming the card key.
Programming the steering
lock unit.
The engine cannot be started
unless a card key and two or
more keys are programmed
after the procedure.
The card key and keys (two