Mazda CX-9 Grand Touring 2009 Manual page 1573

2008 ACCESSORIES & BODY, CAB Exterior Trim - Mazda CX-9
1. Disconnect the negative battery cable.
2. Remove the rear combination light. (See REAR COMBINATION LIGHT
REMOVAL/INSTALLATION .)
3. Remove the rear bumper. (See REAR BUMPER REMOVAL/INSTALLATION .)
4. Remove the rear over fender. (See OVER FENDER REMOVAL/INSTALLATION.)
5. Remove the screws.
6. Pull the extractor chamber in the direction shown by the arrow and remove it.
7. Install in the reverse order of removal.
Fig. 39: Identifying Extractor Chamber Screw
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring