Chapter 1 General Requirements
1 Objectives & Overview
1.1 Object and Scope of this manual
This document is intended as a guide and information resource to properly plan and prepare a
site for the installation of an Innova system (Innova IGS 620, Innova IGS 630).
In addition, this document provides references to the pre–installation documents of the various
product included with an Innova System.
These documents are intended to assist the Installation Specialist and the Site Planner in
properly preparing a site for the installation of this system.
It provides pre–installation data, such as site preparation prior to the delivery of the Innova
System, environmental and electrical requirements and some additional planning aids.
Chapter 1 General Requirements
WARNING
MAKE SURE THE ROOM PREPARATION COMPLIES WITH LOCAL
REGULATIONS AS THE PIM IS NOT INTENDED TO REFLECT ALL OF THEM
Innova
IGS 620, Innova
TM
IGS 630 Preinstallation Manual
TM
Direction 5694389-1-1EN, Revision 2
21