User Manual
6.11
Editing Values
Any value displayed in black with a [V] or [E] icon can be
edited. Edit variables as follows:
1. Tap the variable
2. If a selection window is opened tap the variable
3. Enter a new value
4. Tap the Set button
5. Tap Yes in the warning window
6. The new value is highlighted in yellow
Note: To go back to the original value, tap the Undo button in
the menu bar
7. Tap Commit button in the menu bar to implement a new
value
8. The yellow highlight will disappear
06 June 2013
Druck DPI620 Genii
Page 96 of 179